current location:Home > PRODUCTS > MCU > SAM7 Series MCU > AT91SAM7S512B-MU

AT91SAM7S512B-MU

brand:Microchip Atmel
Description:ARM7TDMI Microcontroller with 512KB Flash, 64 Pins
Packaging:
Packaging:QFN R-QFN064_B 64
Lead-free status/ROHS: Yes
Category:SAM7 Series MCU
Seller:科通芯城自营
Parameter Value
Resistive Touch Screen No
Max I/O Pins 32
Self Program Memory NO
Temp. Range (deg C) -40 to 85
PWM Channels 4
SSC 1
NAND Interface No
External Bus Interface 0
Ext Interrupts 32
Pin Count 64
Timers 3
USB Speed Full Speed
ADC Resolution (bits) 10
DRAM Memory No
USB Interface Device
SRAM (Kbytes) 64
ADC Speed (ksps) 384
USB Transceiver 1
Input Capture Channels 3
Calibrated RC Oscillator No
DAC Resolution (bits) 0
UART 3
Crypto Engine No
CPU ARM7TDMI
Hardware QTouch Acquisition No
Camera Interface No
Graphic LCD No
Max. Operating Frequency 55 MHz
EEPROM (Bytes) 0
Flash (Kbytes) 512 Kbytes
TWI (I2C) 1
MPU / MMU no / no
FPU No
SPI 1
Output Compare channels 3
Operating Voltage (Vcc) 3.0 to 3.6
picoPower No
32kHz RTC Yes
I/O Supply Class 1.8/3.3
Video Decoder No
ADC channels 8
Temp. Sensor No

A member of the Atmel® SAM7S series of flash microcontrollers based on the 32-bit ARM7TDMI® RISC processor. It operates at a maximum speed of 55MHz and features 512KB of dual bank Flash and 64KB of SRAM. The peripheral set includes a FS USB device and Phy at 12Mbps, UART, two USARTs, TWI, SPI, SSC, two PWM timers, three 16-bit timers,RTT, 8x10-bit ADC and 32 IO lines. It achieves single-cycle instruction access from embedded flash at 27 MIPS. The multi-layer bus matrix, multiple SRAM banks, PDC, and DMA support parallel tasks and maximize data throughput. The SAM7S512 operates from 1.65V to 3.6V and is available in 64-pin LQFP and QFN packages.

BuildingAutomation: 舒适性与控制, 消防与安全
IndustrialAutomation: PLC 和 I/O 模块, 仪表
Metering: 电表
MobileElectronics: 便携式音频播放器

深圳市科通技术股份有限公司    consumer hotline:(+86)755-26018083   mail:cs@comtech.cn

© Copyright 2018 www.comtech.cn | 粤ICP备19161615号 |