current location:Home > PRODUCTS > MCU > SAM7 Series MCU > AT91SAM7S64C-AU-999

AT91SAM7S64C-AU-999

brand:Microchip Atmel
Description:ARM7TDMI Microcontroller with 64KB Flash, 64 Pins
Packaging:
Packaging:LQFP R-LQ064_C 64
Lead-free status/ROHS: Yes
Category:SAM7 Series MCU
Seller:科通芯城自营
Parameter Value
CPU ARM7TDMI
Output Compare channels 3
Hardware QTouch Acquisition No
Pin Count 64
32kHz RTC Yes
Max. Operating Frequency 55 MHz
USB Speed Full Speed
EEPROM (Bytes) 0
DRAM Memory No
ADC Speed (ksps) 384
Calibrated RC Oscillator No
Resistive Touch Screen No
DAC Resolution (bits) 0
UART 3
Timers 3
ADC Resolution (bits) 10
TWI (I2C) 1
NAND Interface No
USB Transceiver 1
Input Capture Channels 3
FPU No
Ext Interrupts 32
Self Program Memory NO
Operating Voltage (Vcc) 3.0 to 3.6
PWM Channels 4
picoPower No
SSC 1
I/O Supply Class 1.8/3.3
Video Decoder No
Flash (Kbytes) 64 Kbytes
USB Interface Device
Temp. Sensor No
Crypto Engine No
SPI 1
Max I/O Pins 32
Temp. Range (deg C) -40 to 85
Camera Interface No
Graphic LCD No
ADC channels 8
MPU / MMU no / no
SRAM (Kbytes) 16
External Bus Interface 0

A member of the Atmel® SAM7S series of flash microcontrollers based on the 32-bit ARM7TDMI® RISC processor. It operates at a maximum speed of 55MHz and features 32KB of flash and 16KB of SRAM. The peripheral set includes a FS USB device and Phy at 12Mbps, UART, two USARTs, TWI, SPI, SSC, two PWM timers, three 16-bit timers, RTT, 8x10-bit ADC and 32 IO lines. It achieves single-cycle instruction access from embedded flash at 27 MIPS. The multi-layer bus matrix, multiple SRAM banks, PDC, and DMA support parallel tasks and maximize data throughput. The SAM7S64 operates from 1.65V to 3.6V and is available in 64-pin LQFP and QFN packages.

BuildingAutomation: 舒适性与控制, 消防与安全
HomeEntertainment: 远程控制
IndustrialAutomation: PLC 和 I/O 模块, 仪表
Metering: 电表

深圳市科通技术股份有限公司    consumer hotline:(+86)755-26018083   mail:cs@comtech.cn

© Copyright 2018 www.comtech.cn | 粤ICP备19161615号 |