| Parameter |
Value |
| DAC Resolution (bits) |
0 |
| UART |
3 |
| Crypto Engine |
No |
| CPU |
ARM7TDMI |
| Camera Interface |
No |
| Graphic LCD |
No |
| Max. Operating Frequency |
48 MHz |
| EEPROM (Bytes) |
0 |
| ADC Resolution (bits) |
10 |
| Flash (Kbytes) |
256 Kbytes |
| TWI (I2C) |
1 |
| MPU / MMU |
Yes / No |
| External Bus Interface |
1 |
| Input Capture Channels |
3 |
| FPU |
No |
| SPI |
1 |
| Output Compare channels |
3 |
| Ext Interrupts |
88 |
| Pin Count |
144 |
| Self Program Memory |
NO |
| Operating Voltage (Vcc) |
3.0 to 3.6 |
| picoPower |
No |
| 32kHz RTC |
Yes |
| I/O Supply Class |
1.8/3.3 |
| Video Decoder |
No |
| ADC channels |
8 |
| DRAM Memory |
sdram |
| SRAM (Kbytes) |
32 |
| Temp. Sensor |
No |
| Resistive Touch Screen |
No |
| Max I/O Pins |
88 |
| Temp. Range (deg C) |
-40 to 85 |
| PWM Channels |
4 |
| SSC |
1 |
| DAC Channels |
0 |
| Hardware QTouch Acquisition |
No |
| Timers |
3 |
| USB Speed |
Full Speed |
| USB Interface |
Device |
| NAND Interface |
Yes |
| ADC Speed (ksps) |
384 |
| USB Transceiver |
1 |
| Calibrated RC Oscillator |
No |
A member of the SAM7SE series of flash microcontrollers based on the 32-bit ARM7TDMI® RISC processor. It operates at a maximum speed of 55MHz and features 256KB of flash and 32KB of SRAM. The peripheral set includes an external bus interface (EBI) supporting static memory, ECC-enabled NAND, compact flash and SDRAM, UART, two USARTs, TWI, SPI, SSC, four 16-bit PWM controllers, three 16-bit timers, an RTT and one 8x10-bit ADC. It achieves single-cycle instruction access from embedded flash at 27 MIPS. The multi-layer bus matrix, multiple SRAM banks, PDC, and DMA support parallel tasks and maximize data throughput. The SAM7SE256 operates from 1.65V to 3.6V and is available in 144-pin LFBGA and LQFP 128-pin package.
BuildingAutomation: 舒适性与控制, 消防与安全
HomeEntertainment: 音频, 远程控制
IndustrialAutomation: 工业通信
Metering: 电表
