| Parameter | Value |
|---|---|
| Resistive Touch Screen | No |
| CPU | 32-bit AVR |
| Operating Voltage (Vcc) | 3.0-3.6 or (1.65-1.95+3.0-3.6) |
| Temp. Range (deg C) | -40 to 85 |
| PWM Channels | 13 |
| I/O Supply Class | 3.0-3.6 or (1.65-1.95+3.0-3.6) |
| DAC Channels | 0 |
| NAND Interface | No |
| External Bus Interface | 0 |
| FPU | No |
| Output Compare channels | 16 |
| Ext Interrupts | 28 |
| picoPower | No |
| Timers | 10 |
| 32kHz RTC | Yes |
| Max. Operating Frequency | 60 MHz |
| Video Decoder | No |
| SRAM (Kbytes) | 32 |
| Temp. Sensor | No |
| Calibrated RC Oscillator | Yes |
| DAC Resolution (bits) | 0 |
| UART | 2 |
| Crypto Engine | No |
| Max I/O Pins | 28 |
| Pin Count | 48 |
| Camera Interface | No |
| Graphic LCD | No |
| EEPROM (Bytes) | 0 |
| ADC Resolution (bits) | 10 |
| ADC channels | 6 |
| Flash (Kbytes) | 256 Kbytes |
| TWI (I2C) | 1 |
| MPU / MMU | Yes / No |
| Input Capture Channels | 6 |
| SPI | 3 |
| Hardware QTouch Acquisition | No |
| Self Program Memory | YES |
| USB Speed | Full Speed |
| # of Touch Channels | 32 |
| DRAM Memory | No |
| USB Interface | Device |
| ADC Speed (ksps) | 384 |
| USB Transceiver | 1 |
| 系列 | AVR®32 UC3 |
| 核心处理器 | AVR |
| 芯体尺寸 | 32-Bit |
| 速度 | 60MHz |
| RAM容量 | 32K x 8 |
| 程序存储器类型 | FLASH |
| 程序存储器容量 | 256KB (256K x 8) |
| 输入/输出数 | 28 |
| 振荡器型 | Internal |
| 数据转换器 | A/D 6x10b |
| 连通性 | I²C, IrDA, SPI, SSC, UART/USART, USB |
| 工作电压 | 1.65 V ~ 1.95 V |
| 工作温度 | -40°C ~ 85°C |
| 周边设备 | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
The high-performance, low-power 32-bit AVR RISC-based microcontroller combines 64KB flash memory, 32KB SRAM, full-speed (12 Mbps) USB Mini-host + device, and I2S. The MCU achieves 83 Dhrystone MIPS (DMIPS) at 60MHz and consumes only 23mA at 3.3 volts.
The microcontoller's Memory Protection Unit (MPU) and fast, flexible interrupt controller support the latest real-time operating systems. The Peripheral Direct Memory Access (PDMA) controller transfers data between peripherals and memories without processor involvement, drastically reducing processing overhead with large continuous data streams between MCU modules.
The power manager improves design flexibility and security: the on-chip brown-out detector monitors the power supply, the CPU is run by the on-chip RC oscillator or one of external oscillator sources, and the Real-Time Clock (RTC) and its associated timer track time.
| No. | Description | |
|---|---|---|
| 1 |
 文档(Document)
|
深圳市科通技术股份有限公司 consumer hotline：(+86)755-26018083 mail：cs@comtech.cn
© Copyright 2018 www.comtech.cn | 粤ICP备19161615号 |
